Onekey Recovery - Lenovo 3000 K100 User Manual

Note: In order to use all software shipped with the computer properly, the tool software
pctype must be installed. Otherwise, certain software shipped with the computer
cannot work normally!

2.2 OneKey Recovery

Note: Do not delete or change the backup data in the service partition without
permission. Otherwise, it will affect or damage the rescue system programs.
Main Functions:
OneKey Recovery in the LEOS (press the system rescue button to access system rescue directly
without starting the operating system)
If Windows operating system is installed in your computer before delivery, the OneKey Recovery
function works in the following way:
Recover the
ex-factory state
Instant
Recovery
Instant Backup
31031422 Greenland UG_EN.indd 15
Recover the computer system
partition (drive C) to the state which
exists before delivery
Recover the system partition (drive
C) of the computer to the state which
exists when the user performs the
previous "Instant Backup" operation.
If the user has not performed "instant
backup", the instant recovery
operation will recover the system
partition to the "base backup" state
directly.
This operation backs up the current
data of the system partition (drive C)
of the computer quickly. When the
user performs "Instant Recovery"
later, the system partition will be
recovered to this backup state
quickly.
Note: After this operation, all
existing data in the system
partition will be lost, and
other partitions on the disk
will keep unchanged. In order
to prevent loss of data, be
sure to back up important
data before this operation.
Note: In this operation, other
partitions are not changed or
backed up. Recommendation:
Keep at least 1G of space in
the system partition (drive C)
to ensure the space required
for instant backup.
Lenovo 3000K User Guide
15
2007.8.20 4:58:17 PM