Keyboard - Lenovo 3000 K100 User Manual

1. Connect the monitor signal cable to the on-board graphics card connector if the model you
purchased is not equipped with an external graphics card.
2. If there is an external graphics card, connect the monitor signal cable to the VGA or DVI
connector in the external graphics card.
3. If both your computer and monitor have the DVI connector, you can connect the computer to
the monitor through your own DVI data cable.
4. If there is only DVI connector in the external graphics card and the monitor only have the VGA
connector, connect the monitor data cable and DVI connector by the DVI-VGA converter.
Notes:
• Keep speakers away from the monitor to avoid magnetic interference.
• Ensure the monitor-to-computer cable connections are secure, with screws tightened.
• Connect the monitor signal cable to the on-board graphics card connector if the model you
purchased is not equipped with an external graphics card.

1.5 Keyboard

(This picture is only a sketch map for the keyboard, it does not show the detail of
the key)
[B-1] — Press this key under Windows system to launch the IE.
[B-2] — LVT key, available for models with the 'Rescue System' feature. Press this key to launch
'Rescue System' when the "LENOVO" screen appears during booting.
8
Lenovo 3000K User Guide
31031422 Greenland UG_EN.indd 8
[B-1]
[B-2]
2007.8.20 4:58:06 PM