Lenovo E43 User Manual page 34

Chapter 2. Using your computer
7
Press F10 to exit.
8
Select Yes in the Setup Confirmation window.
Changing or removing the supervisor Password
To change the password, do the following:
1
Select Set Supervisor Password, and press the Enter key. The Set
Supervisor Password window opens.
2
Select Enter Current Password and type in the correct password. Then
press the Enter key once to move to the Enter New Password field,
type in a new supervisor password.
3
Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
4
Commit your password to memory, and press the Enter key.
To remove password, do the following:
1
Select Set Supervisor Password, and press the Enter key.
2
Select Enter Current Password and type in the correct password, and
finally press the Enter key thrice.
Note:
Make sure Password on boot is set to Enabled if you desire password
protection at power on.
28