Advertisement
Available languages
Available languages
B17
B19
Fan Motor
Night Light
Light
*Option Fan & Main Light Together
B20
H
Install the wiring cover plate. Make sure all wiring
connections are inside the box or under the
41952-01 3/13/2006
05-HF-008-Eng_3.13.06.indd 9
Tighten screws.
Black
2 Pin
White
White
Red
Night Light
3 Pin
Black
Light
*Option
Connect wires as shown.
G
wiring cover plate.
B18
Route wires through the strain relief. For supply connection,
use wires suitable for at least 90º C (194º F).
Ground
Green
A
Bare Copper
Black
Main Switch 1 (AC In)
White
Red
Switch 1 (AC In)
Black
Switch 2 (AC In)
B21
Connect 4" duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may need
to be purchased.
9
3/13/06 12:08:48 PM
Advertisement
