Product Description; Intended Use - Gema OptiFlow IG07-P Operating Instructions Manual

Product description

Intended use

OptiFlow IG07-P
Rev. 00 02/19
The OptiFlow injector is used for conveying normal organic powders
between the powder management center and the powder gun.
fig. 1: Powder injector with coded quick release connections
The injector is certified for using in the following zone, if powder hoses
with conductive strips are used, and the grounding resistance is less
than 1 MOhm!
Explosion protection
II 3 D
Observance of the operating, service and maintenance instructions
specified by the manufacturer is also part of conformity of use. This
product should only be used, maintained and started up by trained
personnel, who are informed about and are familiar with the possible
hazards involved.
Any other use is considered non-compliant. The manufacturer is not
responsible for any incorrect use and the risks associated with such
actions are assumed by the user alone!
Zone
22
Product description  9