Turn The Computer On - Lenovo IdeaPad Z360 User Manual

Note: If only one DDR3 SDRAM is used on the computer you are servicing, the card must be
installed in SLOT-0 (
To make sure that the DDR3 SDRAM is installed correctly, do as follows:

1 Turn the computer on.

2 Hold F2 during startup. The BIOS setup utility screen opens. The
Total Memory item shows the total amount of memory installed in your
computer.
: lower slot), but not in SLOT-1 (
b
Appendix A. CRU instructions
: upper slot).
a
43