Lenovo IdeaPad Z360 User Manual page 46

Appendix A. CRU instructions
6 If two DDR3 SDRAMs are already installed in the memory slot, remove
one of them to make room for the new one by pressing out on the latches
on both edges of the socket at the same time. Be sure to save the old
DDR3 SDRAM for future use.
7 Align the notch of the DDR3 SDRAM with the protrusion of the socket
and gently insert the DDR3 SDRAM into the socket at a 30-45° angle.
8 Push the DDR3 SDRAM inward toward the socket until the latches on
both edges of the socket are pushed into the closed position.
9 Reinstall the compartment cover and tighten the screws.
0 Reinstall the battery pack.
A Turn the computer over again. Connect the AC adapter and the cables to
the computer again.
42
b
a
b
a
a