Lenovo IdeaPad Y710 User Manual page 46

Chapter 2. Using Your Computer
Changing or Removing the User Password
To change the password, do the following:
1
Select Set User Password, and press the Enter key. The Set User Password window
opens.
2 Choose your user password, which can be from one to eight alphanumeric
characters in any combination. Type correct password in the Enter Current
Password field. Then press Enter key once to move to the Enter New Password
field, type a new user password in.
3
Press the Enter key once to move to the Confirm New Password field. Retype the
password you just entered to verify it.
4 Commit your password to memory, and press the Enter key.
To remove the password, do the following:
1
Select Set User Password, and press the Enter key.
2
Type correct user password in Enter Current Password, and press Enter key third.
Note:
Make sure the Password on boot is set to Enable if you need the password protection at
power on.
Hard Disk Passwords
Two types of the hard disk passwords help protect the information stored on the hard disk:
Hard disk user password
Hard disk master password, which requires a hard disk user password
You need to set a master password and a user password both as the Hard Disk
Password. Either of the passwords can be used to get access to the Hard disk. Any
change or removal to the master password deletes the user password.
41