Lenovo IdeaPad Y710 User Manual page 27

Novo button
The Novo button functions as OneKey Recovery key; use with caution. Press the Novo
button to enter the main interface of OneKey Recovery while the power is off.
Important:
Do not remove the 2nd Hard Disk Drive before or after the OneKey Recovery backup
process.
Do not exchange the master and slave HDD or perform the OneKey Recovery function
after changing the master HDD as a data HDD, otherwise the system data will be
erased.
When adding 2nd Hard Disk Drive, make sure to insert the 2nd Hard Disk Drive after
completing the backup process, restoration, or quick backup.
Attention:
When you press NOVO key to turn on the computer, please ensure that your computer
is not connected with other peripherals (such as USB storage device, etc.), otherwise the
system may not operate properly.
Once done, the system can no longer return to its previous state. All data on the primary
hard disk partition (usually drive C) will subsequently be lost. Make sure all important
files on the primary hard disk partition have been backed up onto another hard disk or
USB hard disk drive before this operation.
For details, see OneKey Recovery User Guide.
Note:
When your computer is running Windows Vista™, and if you have the EnergyCut program
installed, you can shift the power schemes by pressing the Novo button.
Chapter 2. Using Your Computer
22