Auxiliary Functions - Beko DEN28320GW Instruction Manual

Auxiliary functions

Washing programmes of your
dishwasher are designed to obtain
the best cleaning effect, considering
the type of the soiling, soiling degree
and properties of the dishes to be
washed.
Auxiliary functions allow you save
from time, water and power.
C
Auxiliary functions may cause
changes in the programme
duration.
C
Auxiliary functions are not
suitable for all washing programs.
Indicator of the auxiliary function
that is not compatible with the
programme will not be active.
Half Load function
It is used to operate the machine
without loading it completely.
It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine
as you like.
2. Turn the machine on with On/Off
key.
3. Select the desired programme and
press the Half Load key. The Half
Load indicator will light on the
display in the Function Selected
indicator.
4. Start the program by pressing
Start / Pause / Cancel key.
C
With the Half Load function you
can save both water and power
while using the lower and upper
baskets of the machine.
Fast+ Function
It shortens the time of the washing
cycle selected and decreases water
consumption by enabling washing
under higher pressure.
AquaIntense Function
dishes places in the right side of the
lower basket. It will give better results
to place the most soiled dish to the
right front side.
C
Do not try to remove the
AquaIntense impeller!
SteamGloss function
It provides superior drying
performance.
Automatic Detergent Detection
Feature
The product has a feature to
automatically detect the type of the
detergent and adjust the washing
programme and drying system to the
best performance. If special tablet
detergent is used, the programme
duration can be extended by 20
minutes in order to optimize the
washing and drying performance.
To deactivate:
1. After turning on the machine,
press Time Delay and P+ keys
simultaneously. Keep them
pressed until the countdown 3, 2,
1 is completed on the display.
2. Press P+ key to activate the a:
option. Automatic detergent
detection feature is disabled at
"a:0" option and enabled at "a:1"
option. Set the desired option by
pressing the Time Delay key.
3. Turn off the machine with On/Off
key to save the changes.
33 EN
AquaIntense
impeller located
under the lower
impeller helps
washing your
heavily soiled