KitchenAid KDTE234GPS User Instructions page 9

OPTION SELECTIONS
Dries dishes with heat and a fan. This option,
with the use of rinse aid, will provide the best
drying performance. Plastic items are less likely
to deform when loaded in the top rack. Turn the
ProDry™ option off for an air dry.
(on some models)
Dries dishes with heat. This option, with the
use of rinse aid, will provide the best drying
performance. Plastic items are less likely to
deform when loaded in the top rack. Turn the
(on some models)
Heat Dry option off for an air dry.
The upper rack has ip-up spray nozzles that
reach into deeper items such as sports bottles,
baby bottles, or oddly shaped items. Flip the
nozzles up to use them and down to move them
(on some models)
out of the way.
Raises the main wash temperature to improve
cleaning for loads containing tough, baked-on
food.
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard 184
for Residential Dishwashers. Certi ed residential
dishwashers are not intended for licensed food
establishments. Only sanitizing cycles have
been designed to meet the requirements of the
NSF/ANSI 184 performance standard for soil
removal and for sanitization ef cacy. There is
no intention, either directly or indirectly, that all
cycles on a NSF/ANSI 184 certi ed dishwasher
meet the NSF/ANSI 184 performance standard
for soil removal and for sanitization ef cacy.
The Sani Rinse indicator glows at the end of the
cycle if the Sani Rinse option was successfully
completed. If the indicator does not activate, it
is probably due to the cycle being interrupted.
Runs the dishwasher at a later time or during
off-peak electrical hours. Select a wash cycle
and options. Touch the Delay keypad. Touch
START/RESUME. Close the door rmly.
NOTE: Any time the door is opened (such as to
add a dish), the Start/Resume keypad must be
touched again to resume the delay countdown.
OPTIONS CAN BE WHAT IT DOES ADDED
SELECTED
WITH
Available with Uses the heating
any cycle element, vents,
except Rinse and a fan to
Only speed drying
times. ProDry™
option defaults
to On when any
cycle is selected,
except for
Express Wash
and Rinse Only.
Available with Activates the
any cycle heating element
except Rinse at the end of a
Only wash cycle to
speed drying
times. Heat Dry
defaults to On
when any cycle is
selected, except
for Express Wash
and Rinse Only.
ProWash™ Bottle Wash
nozzles ensure
Express Wash
interior wash and
Tough
rinse coverage
Normal
inside taller
items, such
as bottles.
ProWash™ Raises the main
wash temperate
Tough
from 105°F (41°C)
Normal
to either 130°F
(55°C) or 140°F
(60°C).
ProWash™ Increases the
main wash
Tough
temperature from
Normal
105°F (41°C) to
140°F (60°C) and
the nal rinse
from 140°F (60°C)
to 155°F (68°C).
Available with Delays the start
any cycle of a cycle to the
speci ed time.
ADDED
TIME TO WATER
CYCLE GALLONS
(LITERS)
ProDry™: 0
0:10 to 0:50
Extended
ProDry™
(includes
ProDry™
time):
0:40 to 1:20
Heat Dry: 0
0:10 to 0:50
Extended
Heat Dry
(includes
Heat Dry
time):
0:40 to 1:20
0:07 0
0:00 to 0:30 0 to 3.0
(0 to 11.2)
0:00 to 2:20 1.2 to 6.2
(4.8 to 23.3)
0 0
9