Epson Aculaser CX28DN Series Reference Manual page 303

Item
SNMP v1/
v2c/(IP)
SNMP v3
Configuring the Printer
Description
Read Specifies the community name to be used for scan-
Commu- ning.
nity Name
Range: Up to 15 characters
Default: public
Write If Enable is selected, Write is enabled.
Choices: Enable, Disable
Default: Enable
Write Specifies the community name to be used for read-
Commu- ing and writing.
nity Name
Range: Up to 15 characters
Default: private
Context Specifies the context name.
Name
Range: Up to 63 characters
Default: [Blank]
Discovery If Enable is selected, Discovery is enabled.
Choices: Enable, Disable
Default: Enable
Discovery Specifies the user name for detection.
User
Range: Up to 32 characters
Name
Default: public
Read User Specifies the name of read only user.
Name
Range: Up to 32 characters
Default: initial
Read Specifies the security level for read only user.
Security
Choices: None, Auth-password, Auth-password/
Level
Default: Auth-password/Priv-password
Read Specifies the read only user authentication pass-
Auth-pass- word to be used for authentication.
word
Range: 8 to 32 characters
Default: AuthPassword
The same name specified as the Discovery
User Name and Write User Name cannot be
used.
Priv-password
281