Epson Aculaser CX28DN Series Reference Manual page 285

DNS Settings
The Network - TCP/IP - DNS Settings window allows you to configure the
following items.
Item
Host Name
Domain Name
Domain Name
Automatic
Acquisition
DNS Server
DNS Server
Automatic
Acquisition
Dynamic DNS
Apply button
Clear button
Configuring the Printer
Description
Specifies the host name.
Range: Up to 63 characters
Default: AL-CX28-xxxxxx
xxxxxx displays six last digits of the MAC address
in hexadecimals.
Specifies the domain name.
Range: Up to 63 characters
Default: [Blank]
Select whether or not the domain name automatic
acquisition is used.
Choices: Enable, Disable
Default: Enable
Specifies the DNS server. Up to three can be registered.
Default: 0.0.0.0
An IPv4 or IPv6 address can be specified.
Select whether or not the DNS server automatic
acquisition is used.
Choices: Enable, Disable
Default: Enable
Select whether or not Dynamic DNS is used.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT -
NETWORK SETTING - DYNAMIC DNS
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
263