Installing The Printer Driver From The Cd-Rom - Epson LQ-590 Reference Manual

If the printer driver is installed in the client beforehand, you
need to select the new printer driver or the current printer
driver. When the prompt to select the printer driver appears,
select the printer driver according to the message.
If the additional driver for Windows NT 4.0 is installed in the
Windows XP or 2000 printer server, go to the next step.
If the additional driver for Windows NT 4.0 is not installed in
the Windows XP or 2000 printer server or the printer server's
OS is Windows Me, 98, or 95, go to "Installing the printer
driver from the CD-ROM" on page 102.
5. Select whether to use the printer as the default printer or not,
then click OK.
6. Click Finish.

Installing the printer driver from the CD-ROM

This section describes how to install the printer driver in the
clients when setting the network system as follows:
The additional drivers are not installed in the Windows XP,
2000, or Windows NT 4.0 printer server.
The printer server's OS is the Windows Me, 98, or 95 and the
client's OS is the Windows XP, 2000, or Windows NT 4.0.
The on-screen displays on the following pages may differ
depending on the version of Windows OS.
Note:
When installing in Windows XP, 2000, or Windows NT 4.0 clients,
you must access Windows XP, 2000, or Windows NT 4.0 with the
Administrator.
102
Printer Software