Continuous Paper; Skip Over Perforation - Epson LQ-300+II User Manual

Settings
International character set
for Italic table
Pitch
Font
Auto CR (IBM 2390 Plus)**
A.G.M. (IBM 2390 Plus)**
Manual feed wait time
Buzzer
Roll paper
* The options available vary depending on the country of purchase.
** These settings take effect only when IBM 2390 Plus emulation is selected.
Page length for tractor
This setting allows you to set the page length (in inches) for

continuous paper.

Skip over perforation

This feature is available only when continuous paper is selected.
When you select On, the printer provides a one-inch (25.4 mm)
margin between the last line printed on one page and the first line
printed on the next page. Because the program margin settings in
most applications override margin settings made from the control
panel, you should use this setting only if you cannot set your top
and bottom margins using your application.
90
Options
Italic U.S.A., Italic France, Italic Germany,
Italic U.K., Italic Denmark1, Italic Sweden,
Italic Italy, Italic Spain1
10 cpi, 12 cpi, 15 cpi, 17 cpi, 20 cpi,
Proportional
OCR-B, Orator, Orator-S, Script C, Roman T,
Sans Serif H
On, Off
On, Off
1 second, 1.5 seconds,
2 seconds, 3 seconds
On, Off
On, Off