Removing A Printed Document From The Push Tractor - Epson LX-300+II User Manual

Removing a printed document from the push
tractor
Follow these steps to remove the printed document:
1. Press the Tear Off (Font) button. Make sure the Tear Off
(Font) lights are flashing. (This indicates that your paper is at
the current tear-off position.)
2. Open the paper guide cover, then tear off the printed
document using the tear-off edge of the paper tension unit.
Note:
If your paper's perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the Micro Adjust
feature. See "Adjusting the tear-off position" on page 30.
c
3. Close the paper guide cover.
When you resume printing, the printer automatically feeds
the paper back to the top-of-form position and starts printing.
Caution:
Never use the paper feed knob to adjust the tear-off position;
this may damage the printer or cause it to lose the tear-off
position.
Paper Handling
2
2
2
2
2
2
2
2
2
2
2
2
21