Options - Epson LX-300+II User Manual

Options

When you use the cut-sheet feeder, the paper does not
feed properly
The paper does not feed.
Cause
The cut-sheet feeder may be
incorrectly installed on the
printer.
The paper release lever may be
in the wrong position.
You may have loaded too
many sheets in the bin.
Paper may be jammed near the
print head.
The edge guide positions may
be incorrect.
There may be only one sheet
left in the bin.
Two or more sheets feed at one time.
Cause
You may have loaded too
many sheets in the bin.
What to do
Reinstall it as described under
"Cut-sheet feeder" on page 121.
Check that the paper release lever is
pushed back to the single-sheet position.
Remove some sheets. See "Paper" on
page 146 for information on the types
and quantity of paper that can be loaded
with the cut-sheet feeder.
Look for a paper jam.
Position the edge guides at the
diamond-shaped guide marks.
Add more paper.
What to do
Remove some sheets. See "Paper" on
page 146 for information on the types
and quantity of paper that can be loaded
with the cut-sheet feeder.
Troubleshooting
5
5
5
5
5
5
5
5
5
5
5
5
109