Using Your Razer Deathadder V3 - Razer DeathAdder V3 Master Manual

6. USING YOUR RAZER DEATHADDER V3

SWITCHING BETWEEN DPI
Change the mouse's DPI to match your playstyle with a press of the DPI cycle / Polling rate button or
fine-tune your own sensitivity setting using the Razer Synapse app. The Indicator LED will briefly
change its color to show which DPI stage is currently active.
You can fine-tune your own sensitivity setting using the Razer Synapse app.
CHANGING THE POLLING RATE
Press and hold the DPI cycle / Polling rate button for 5 seconds to switch between 1000Hz and 8000Hz
polling rates on your mouse.
F O R G A M E R S . B Y G A M E R S .
1x
1x
5s
™
Learn more about Sensitivity
DPI Indicator LED
400
800
1600
(default)
3200
6400
Polling rate Indicator LED
1000Hz
Blinking green
(default)
8000Hz Blinking red
Red
Green
Blue
Cyan
Yellow
6