Controls - Electrolux EI23BC80KS Use And Care Manual

IQ-Touch
TM
An indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
NOTE
*
Features may vary according to model.
fast freeze Activates a faster rate for freezing food.
fast ice Increases the production of ice
water filter Press and hold for three (3) seconds to reset after filter change.
air filter Filter condition status is always displayed when door is open. Press and hold for
three (3) seconds to reset after filter change.
temp mode Touch to toggle display from Fahrenheit to Celsius.
mute sounds Tones emitted by each key press can be turned off based on user preference. The
sounds are muted when the red indicator is lit. Warning signals will stay active.
default settings Resets all refrigerator settings such as temp, temp display and tones to their fac-
tory default settings.
on off Press and hold for three (3) seconds to turn off the cooling system to clean the
refrigerator. It also turns off the ice maker. The temperature displays will read OFF.
eco friendly Keep this switch set on eco friendly (light on) for lowest energy usage. If moisture
appears on the cabinet between the doors, pressing this button will turn the light
off and enable an electric heater used to reduce moisture on the cabinet between
the doors.
*vacation mode Conserves energy by increasing the time between automatic defrost. This feature
is automatically activated during long periods between door openings. Vacation
mode is manually activated when the red indicator is lit.
IMPORTANT
Pressing the system on/off icon does not turn off power to your refrigerator. You
must unplug the power cord from the wall outlet.
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The display will time
out after 10 seconds and return to the basic display.
Alarms
Door Ajar If the door has been left open for an extended period of time, an alarm will sound
and the door ajar indicator will display on the bottom display of the control panel.
The alarm is turned off by closing the door. The mute sounds key will blink to
prompt the reset of any active alarms. Press this key to reset any system alarms.
High Temp In the event of a high temperature condition, the temperature display will blink and
display HI. After 20 minutes, the alarm will sound and the high temp indicator will
be red on the bottom of the control panel. The mute sounds icon will illuminate
until pressed, acknowledging the alarm, at which time the highest temperature
reached will be displayed and the refrigerator will resume normal operation. In
case the high temp alarm is not acknowledged at the first alarm sound time out,
when the door is first opened, the alarm sound will be repeated.
Power Fail In the event of a power failure, the power fail alert will be displayed and the
temperature display will blink until the mute sounds icon is pressed, acknowledg-
ing the alarm. Other modes may be turned off until the alarm is acknowledged. The
power fail alert is turned off and the refrigerator will resume normal operation. The
high temp alarm may also be illuminated until a safe operating range tempera-
ture has been reached.
15

Controls