Table of Contents
Advertisement
14
Controls
press & hold
on
off
refrigerator temp
freezer temp
hold to reset
water
filter
hold to reset
air
filter
LED COLORS / Assembly
IQ-Touch
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
default
fast freeze
settings
fast ice
vacation mode
water filter
air filter
temp mode
mute sounds
default settings
on off
IMPORTANT
Pressing the system on/off icon does not turn off power to your refrigerator. You
temp
must unplug the power cord from the wall outlet.
mode
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The display will time
out after 10 seconds and return to the basic display.
Alarms
good
Door Ajar
order
replace
High Temp
good
order
replace
Power Fail
door ajar
high temp
power fail
TM
Activates a faster rate for freezing food.
Increases the production of ice
Conserves energy by increasing the time between automatic defrost. This feature
is automatically activated during long periods between door openings. Vacation
mode is manually activated when the red indicator is lit.
Press and hold for three (3) seconds to reset after filter change.
Filter condition status is always displayed when door is open. Press and hold for
three (3) seconds to reset after filter change.
Touch to toggle display from Fahrenheit to Celsius.
Tones emitted by each key press can be turned off based on user preference. The
sounds are muted when the red indicator is lit. Warning signals will stay active.
Resets all refrigerator settings such as temp, temp display and tones to their fac-
tory default settings.
Press and hold for three (3) seconds to turn off the cooling system to clean the
refrigerator. It also turns off the ice maker. The temperature displays will read OFF.
If the door has been left open for an extended period of time, an alarm will sound
and the door ajar indicator will display on the bottom display of the control panel.
The alarm is turned off by closing the door. The mute sounds key will blink to
prompt the reset of any active alarms. Press this key to reset any system alarms.
In the event of a high temperature condition, the temperature display will blink and
display "HI". After 20 minutes, the alarm will sound and the high temp indicator
will be red on the bottom of the control panel. The mute sounds icon will illumi-
nate until pressed, acknowledging the alarm, at which time the highest temperature
reached will be displayed and the refrigerator will resume normal operation. In
case the high temp alarm is not acknowledged at the first alarm sound time out,
when the door is first opened, the alarm sound will be repeated.
In the event of a power failure, the power fail alert will be displayed and the
temperature display will blink until the mute sounds icon is pressed, acknowledg-
ing the alarm. Other modes may be turned off until the alarm is acknowledged. The
power fail alert is turned off and the refrigerator will resume normal operation. The
high temp alarm may also be illuminated until a safe operating range tempera-
ture has been reached.
press & hold
on
defau
settin
off
refrigerator temp
freezer temp
temp
mode
hold to reset
good
order
water
filter
replac
hold to reset
good
order
air
filter
replac
door a
high t
power
Overlay Part
Advertisement
Table of Contents
