Care And Cleaning Of The Cooktop - Samsung NX58 751 Series User Manual

Oven door
WARNING
Do not allow moisture to enter the door or contact the door gasket during
cleaning. Moisture entering the door assembly and or getting on the door gasket
will damage the gasket.
Handclean gray
areas.
The oven door has multiple surfaces that require different cleaning techniques.
The gasket on the inside surface of the oven door should never be cleaned or
moved to clean other surfaces. The gasket is made of woven material which is
essential for a good heat seal.
The inside door surface outside of the gasket should be cleaned by hand with
hot, soapy water and a soapy plastic scouring pad. Rinse and dry thoroughly with
a clean, soft cloth. Do not get the gasket wet or allow moisture to get inside the
door assembly.
The inside door surface inside of the gasket and the inside door glass are cleaned
during the oven's self-cleaning cycle.
The outside door surface is stainless steel and should be cleaned using the
instructions on page 60.
The outside glass surface can be cleaned with glass cleaner or warm, soapy water
with a thorough rinse. Do not let moisture get inside of the door assembly.
NX58H5 Series_AA_DG68-00526A-14_EN+MES+CFR_WEB.indb 63

Care and cleaning of the cooktop

Surface burner controls
Do not move or
clean gasket.
1. Make sure all surface burner knobs are
in the OFF position.
2. Pull the control knobs straight off the
surface burner control valve stems.
CAUTION
Do not clean the control knobs in a
dishwasher. They are not dishwasher-safe.
3. Clean the control knobs in warm, soapy
water. Rinse and completely dry all
surfaces (including back and stem hole).
WARNING
Do not use spray cleaners on the surface
burner control panel. Spray entering
the valve holes could contact electrical
components resulting in death, personal
injury, or product damage.
4. Clean stainless steel surfaces with
stainless steel cleaner on a damp, soft
cloth. See page 60.
English 63
2020-06-23 오전 9:09:50