Table of Contents
Advertisement
1.3 Safety
Installation of products in pits must be carried out by
specially trained persons.
Work in or near pits must be carried out according to local
regulations.
DANGER
‐
It must be possible to lock the main switch in position
0. Type and requirements as specified in local
regulations.
Persons must not enter the installation area when the
atmosphere is explosive.
For safety reasons, all work in pits must be supervised by a person
outside the pit.
We recommend that you carry out all maintenance and
service work when the product is placed outside the pit.
Pits for submerged sewage and wastewater products may contain
sewage or wastewater with toxic and/or disease-causing
substances. Therefore all persons involved must wear appropriate
personal protective equipment and clothing, and all work on and
near the product must be carried out under strict observance of
hygienic regulations in force.
DANGER
Crushing hazard
‐
Always lift the product by its lifting bracket or by
means of a forklift truck if the product is on a pallet. Do
not lift the product by the power cable.
2. Preparing the dismantling of the product
2.1 Transporting the product
Transport the product in horizontal position. Make sure the product
cannot roll of fall over.
See the installation and operating instructions for mixers, type AMG
(96498078). Use the QR code and the link on the front of this
document.
2.2 Contaminated products
See the installation and operating instructions for mixers, type AMG
(96498078). Use the QR code and the link on the front of this
document.
2.3 Handling and storing the product
2.3.1 Handling the product
The product weights between 78 and 280 kg with motor bracket and
10 m cable. It is therefore important to use the correct lifting
equipment. The product weight is stated on the nameplate.
Make sure that all lifting equipment is rated for the
purpose.
Check the lifting equipment for damage before attempting
to lift the components.
DANGER
Crushing hazard
‐
Always lift the product by its lifting bracket or by
means of a forklift truck if the product is on a pallet. Do
not lift the product by the power cable.
Do not lift the product by the power cable. It may result in
electric short circuit and risk of shock when the product is
connected to the mains. The cable and cable entry my be
damaged, leading to loss of watertightness and
consequent severe damage to the motor.
2.3.2 Storing the product
See the installation and operating instructions for mixers, type AMG
(96498078). Use the QR code and the link on the front of this
document.
5
Advertisement
Table of Contents
