Table of Contents
Advertisement
Installation (continued)
7
Attaching the drawer glides
Align the holes in the small side of the drawer glide (FF)
with the holes at the bottom of the drawer assembly.
Attach the drawer glide (FF) using the glide screws (GG).
Repeat for the other side of the drawer assembly.
Care and Cleaning
To remove the part labels, gently rub a soft cloth moistened with a mild household cleanser over the part label. Then lift a corner of the
label and pull firmly but smoothly until the label comes off.
Dust as needed with a clean, lint-free absorbent cloth.
Spray furniture polish may be used when cleaning.
Scratches and nicks can be touched up with a furniture touch-up stick, shoe polish, or a crayon.
8
Finished product
FF
8
Advertisement
Table of Contents
