Table of Contents
Advertisement
Installation Menu
LG Hotel Mode Setup
(12-2) Programme
- If the Input source is DTV or ATV, the set programme is played when the power is turned on .
- Only when the Input source is DTV or ATV, it can be entered into the Programme item .
- When the Input source is turned off, the Last input at the time of the power-off is turned on, and when
the Last input is the RF, the Last programme is played .
- If the Input source is the DTV, the programme number existing at the programme table can be select-
ed .
- If the Input source is the ATV, 0~(MAX_PR – 1) can be selected . (If the channel map structure does
not support this, it follows the structure of the said model .)
- The programme should be rotated .
- If both the programme and the ON TIME are set, the programme takes the priority .
(12-3) Volume
- If both 'Volume' data and 'On Time' is set, but just the value is different, then 'Volume' has priority .
-This sets whether to apply the Volume Level or not when the power is turned on .
When both the Volume and ON TIME Volume are set and have different values, the Volume Level
value is set as the ON TIME Volume value, and cannot move to the ON TIME Volume item .
- The next value for the max volume is OFF . And next it will be changed to 0 .
(12-4) A/V Setting
- Set to Yes(Work) or No(Do Not Work) .
- If 'A/V Setting' is changed from No to Yes, parameters that are set before entering Installation Menu
are applied whenever turn on power .
- Following Parameters are applied to basic .
Picture section - PSM mode, Picture Data (Contrast, Brightness, Colour, Sharpness, Tint)
Sound section - SSM mode, Sound Data (Balance, Equalizer Data) and AVL and Language, Teletext
Except these, other Parameters are applied differently according to the TVSet .
(13) Radio Video Blank
- Set to Yes(Work) or No(Do Not Work) .
- Programme that is set to 'Radio Programme' and only has Sound should decide whether to set
'Video Blank' or not .
- When 'Radio Video Blank' is set to Yes(Work), 'Video Blank' works only in case of Radio Programme .
- Although set to Yes(Work), if there are Video signal, 'Video Blank' wouldn't work . In consideration
of case that display background screen and broadcast only with Radio, 'Video Blank 'works only
when there is no Video signal .
- When set to No(Do Not Work), 'Video Blank' do not work although it is the Radio Programme .
- This operates only in the Analog TV Mode .
(13-1) Start PR. No.
- Item to set starting programme of Radio Programme .
- Available programmes to set are 0~199 .
6
language, ARC Data .
Advertisement
Table of Contents
