Configuration Setup; Number Of Rcu; Splash Offset Time; Usb Auto Playback - LG LS341H Z Series Installation Manual

22

Configuration Setup

* Image shown may differ from your TV.

Number of RCU

• It is a function to set whether to use Select RCU or not and set number of RCU.
• When Number of RCU is set to 0, this function do not use.
• Number of RCU value range 1~9
* RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV.

Splash Offset Time

• Set the splash image display time
• When Splash Offset Time is set to Off, TV logo(splash image) do not display.
• The time can be set to between 0 and 10 seconds.

USB Auto Playback

• When USB Auto Playback is set to Movie, TV finds and plays the USB's movie files located at the root(top) directory Movies if USB is plugged in.
(Some menu OSDs may prevent this function.)
• When USB Auto Playback is set to Photo, TV finds and plays the USB's photo files located at the root(top) directory Photos if USB is plugged in.
(Some menu OSDs may prevent this function.)
• If it reaches the last file, it starts the first file again.

Auto Teletext

(Depending on model)
• Auto Teletext function can be operated only in Australia.
• If Auto Teletext is set to On, the teletext mode stays enabled even when the Programme signal disappears on the teletext screen.
• If Auto Teletext is set to Auto, the teletext mode is disabled when the Programme signal disappears on the teletext screen.

15Min Auto Off

• When 15Min Auto Off is set to On, TV will turn off if there is no signal in 15Min.