Program Type Preset; Changing Language For Pty Function - Kenwood X838 Instruction Manual

Program Type preset

Putting the Program Type in the Preset button memory and
calling it up quickly.
Presetting the Program Type
1
Select the Program Type to preset
Refer to <PTY(Program Type)> (page 16).
2
Preset the Program Type
Press the [#1] — [#6] button for at least 2 seconds.
Calling up the preset Program Type
1
Enter PTY mode
Refer to <PTY(Program Type)> (page 16).
2
Call up the Program Type
Press the [#1] — [#6] button.

Changing Language for PTY Function

Selecting the Program Type display language.
1
Enter PTY mode
Refer to <PTY (Program Type)> (page 16).
2
Enter Changing Language mode
Press the [DISP] button.
3
Select the language
Press the [FM] or [AM] button.
Each time the button is pressed the language switches as shown
below.
Language
English
Spanish
French
Dutch
Norwegian
Portuguese
Swedish
German
4
Exit Changing Language mode
Press the [DISP] button.
Traffic Information
Switching to traffic information automatically when a traffic
bulletin starts even when you aren't listening to the radio.
Press the [TI] button.
Each time the button is pressed the Traffic Information function
turns ON or OFF.
When it's ON, "TI" indicator is ON.
When a traffic information station isn't being received the "TI"
indicator blinks.
When a traffic bulletin starts, "Traffic Info ON" is displayed it and
it switches to traffic information.
• During reception of a AM station when the Traffic Information
function is turned ON, it switches to a FM station.
• During reception of traffic information the adjusted volume is
automatically remembered, and the next time it switches to traffic
information it's automatically the remembered volume.
Receiving other traffic information stations
Press the [4] or [¢] button.
Traffic information station switching can be done when listening to
the radio.
— 17 —
Display
"English"
"Spanish"
"French"
"Dutch"
"Norwegian"
"Portuguese"
"Swedish"
"German"