Audio Control; Switching Display; Tel Mute - Kenwood KRC-294G Instruction Manual

Each time the button is pressed the items that can be adjusted
switch as shown below.
4
Adjust the Audio item
Press the [4] or [¢] button.
Adjustment Item Display
Bass level "BAS"
Treble level "TRE"
Balance "BAL"
Fader "FAD"
5
Exit Audio Control mode
Press the [AUD] button.

Switching Display

Switching the information displayed.
Press the [CLK] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information
Program Service name or Frequency
Clock
Displaying the frequency during Program Service name
reception
Press the [CLK] button for at least 2 seconds.
The frequency for the RDS station will be displayed for 5
seconds instead of the station name.
Range
–8 — +8
–8 — +8
L15 — R15
R15 — F15
— 7 —
In Tape source
Information
Play side
Clock
In External disc source (KRC-294A/ 294G/ 27A/ 27G)
Information
Track Time
Disc name
Disc title
Track title
Clock

TEL Mute

The audio system automatically mutes when a call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system comes back
ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system comes back
ON.
Display
"D-NAME"
"D-TITLE"
"T-TITLE"