Selecting The Source; Loudness; Db (Sound Coordinate); Audio Control - Kenwood KRC-294G Instruction Manual

General features

Selecting the Source

Press the [SRC] button.
Source required
Tuner
Tape
External disc (KRC-294A/ 294G/ 27A/ 27G only)
Standby (Illumination only mode)
This unit automatically turns full power OFF after 20 minutes lapses
in Standby mode in order to save the vehicles battery.
The time until full power OFF can be set in <Power OFF Timer>
(page 18).

Loudness

Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it's ON, "LOUD" indicator is ON.

dB (Sound Coordinate)

You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRC] button.
Display
"TUNER"
"TAPE"
"DISC"
"ALL OFF"
— 6 —
2
Enter Control mode
Press the [AUD] button.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Select the "DB " display.
4
Select the Sound type
Press the [#1] — [#5] button.
Press button Sound setting
[#1] Flat
[#2] Rock
[#3] Pops
[#4] Jazz
[#5] Easy
When the dB(Sound Coordinate) setting is changed, the Bass and
Treble set in audio control replace the dB(Sound Coordinate) values.
5
Exit Control mode
Press the [AUD] button.

Audio Control

1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] button.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Display
"DB FLAT"
"DB ROCK"
"DB POPS"
"DB JAZZ"
"DB EASY"