Bosch B1 RKM 13102 Instructions For Use Manual page 42

Disconnecting the
timer
42
Press the or
timer setting (start and/or stop). The timer is set
in blocks of 15 minutes.
5 seconds after you have finished programming
the timer, the screen displays the set
temperature and the light indicates that the
start/stop function has been activated.
When the "on" and "off" times set on the timer
are shown on the display screen, the two dots do
not flash.
To check the programmed start/stop times, press
the relevant button once. The screen displays
the programmed time for 5 seconds.
Press the "Start" / "Stop" buttons for a period
of two seconds. The timer light goes out. The
timer deactivated.
The times and functions programmed on the
timer are stored and the programme is repeated
every day until the timer is desactived or the
setting is modified as described above.
button in order to alter the