Bosch B1 RKM 13102 Instructions For Use Manual page 37

Turning the appliance on
Cooling and
Dehumidification
Mode
21
Speed
22
Plug the appliance into the mains electricity
supply.
Turn the appliance on using the "On/Off" button.
Select either the "Cooling", via the "mode"
button, Fig. 21.
Use the "Speed" button to set the cooling
"speed". Fig. 22.
a
N.B.
Fan speed varies automatically when the
appliance is set to automatic mode even though
the control panel is not touched.
Set the thermostat to the desired temperature with
buttons
The appliance cools and dehumidifies the air in
the room at the same time in order to produce
pleasant air conditions.
Should the appliance turn itself off by effect of
the thermostat, it will come back on again when
room temperature rises 2°C.
The water produced during this process by
condensation is led outside and released from
the condenser by evaporation.
If the red warning light comes on:
Condensed water has unduly accumulated in the
tank on the indoor unit.
Condensed water is emptied using the drainage
pipe (see appliance description, p. 28), which is
coupled onto the water drainage nozzle on the
bottom of the appliance, Fig. 24.
maximun cooling speed.
silent cooling.
automatic mode: the appliance regulates
speed automatically depending on room
temperature.
and , Fig. 23.
37