Basic Adjustment; Av Settings - Sharp TU-T2 Operation Manual

Basic adjustment

AV Settings

Settings
AV Settings
Languages
Parental Control
General
OK Select Exit Exit Menu
AV Settings
HDMI Video
Adjusts the video resolution when the Receiver is
connected to your TV using a HDMI cable. This allows
you to watch High Definition (HD) TV.
Sets the video resolution to 576p.
576p
Sets the video resolution to 720p.
720p
Sets the video resolution to 1080i.
1080i
Sets the video resolution to 1080p.
1080p
NOTE
Consult the documentation supplied with your TV to select the
•
correct TV resolution.
If your TV is not HD Ready but has a HDMI socket, select the
•
576p video resolution.
AV Settings
HDMI Audio
Adjusts the audio output type when the Receiver is
connected to surround sound system using a HDMI
cable. This allows you to enjoy realistic live sound.
The Receiver will output Stereo sound
when connected to a standard surround
Stereo
sound system using the HDMI cable.
The Receiver will output Dolby Digital
surround sound when connected to
Dolby Digital
a compatible surround sound system
using the HDMI cable.
NOTE
Only select Dolby Digital if you have a compatible surround
•
sound system. If you choose this setting with a non-compatible
sound system the audio will not be heard.
Not all channels are broadcast with Dolby Digital sound.
•
TU-T2_GB.indd 17 TU-T2_GB.indd 17
HDMI Video 1080p
HDMI Audio
SCART Output
Screen Size
Menu Transparency
Channel Change Timeout
Audio Desacription Volume
Audio Delay Settings
Item
Item
AV Settings
SCART Output
Adjusts the video signal type when the Receiver is
connected to your TV using a SCART cable.
Item
This selects an RGB video signal type.
The video signal will be splits the video
output into separate red, green and
RGB
blue signals to provide the best picture
quality.
This selects a composite video signal.
Produces a single composite video
Composite
signal which provides poor picture
quality.
NOTE
If your TV is not compatible with RGB signals, select the
•
Composite video output.
AV Settings
Screen Size
Adjusts the screen size (aspect ratio) between 16:9
widescreen and various 4:3 picture sizes.
Item
Displays a 16:9 widescreen picture.
This ensures the best aspect ratio for
16:9 Widescreen
widescreen TVs.
In this mode, the picture is stretched
towards each side of the screen.
4:3 Widescreen
This displays a picture similar to 16:9
(16:9)
widescreen on 4:3 TVs.
Displays a 4:3 picture in the centre of
the screen. With some programmes,
4:3 Centre Cut Out
bars may appear on the left and right
hand side of the screen.
Displays a 16:9 picture in the centre of
the screen. With some programmes,
4:3 Letterbox (16:9)
bars may appear on the top and bottom
of the screen.
NOTE
If you have connected the Receiver to a Widescreen TV, you
•
should select the 16:9 Widescreen setting.
The wide mode feature lets you adjust the screen size using the
•
WIDE button on the remote control unit. Press WIDE to cycle
through the available screen sizes while watching TV.
If you have selected 16:9 widescreen in the AV settings menu,
•
the wide mode will have no effect.
17
01/06/2010 16:03:03 01/06/2010 16:03:03