Watching Tv; Daily Operation - Sharp TU-T2 Operation Manual

Watching TV

Daily operation

Switching on/off
Standby mode
E
Select standby mode
If the Receiver is switched on, you can switch it to
standby by pressing a on the remote control unit.
E
Switching on from standby
From standby, press a on the remote control unit.
MENU HDMI
TEXT CH.LIST
NOTE
If you are not going to use this Receiver for long periods of
•
time, be sure to remove the power adapter from the supply.
(Page 9).
A small amount of electric power is still consumed with the
•
Receiver in standby mode.
Adjusting the volume
Press the VOL+ button to increase the volume and the
VOL- button to decrease the volume.
10
TU-T2_GB.indd 10 TU-T2_GB.indd 10
WIDE
AUDIO SUBT
Changing channels
With PROG +/-: With 0_9:
LAST
VOL PROG PROG
MUTE
VOL
PROG PROG
Switching between channels
Switch between the current channel and the previous
channel by pressing LAST. Each press of the LAST
button will toggle between the current channel and the
previous channel.
Programme information
1
Press the INFO button once to display times,
channel, programme, start and finish dates.
2
Press the INFO button again to display
additional information about the current
programme.
Selecting a video output source
Once the Receiver is connected to your TV using either
a HDMI cable or SCART cable, you can select the
appropriate output source by pressing A/V on the remote
control unit.
Selecting an audio language
Some programmes are broadcast with multiple audio
channels. Press AUDIO to display the audio menu.
INFORMATION
Select the audio channel that you want to use.
ENG Stereo
ENG Stereo
Up Down
1 a/b
Press to select the desired channel.
2
Press OK to confirm the audio channel
l l 2 2 3 3
4 4 5 5 6 6
7 7 8 8 9 9
AD 0 0 A/V
Audio Channel
OK
Select Exit Exit Menu
01/06/2010 16:02:55 01/06/2010 16:02:55