3. How to Eject Manually
1. Remove the Rear Cabinet.
2. To remove the Loader PCB Holder with the DVD
Main CBA Unit, remove three screws (S-7) in Fig.
D2. Do not disconnect connectors.
3. To remove the Chassis Cover, remove 4 screws A
as shown in Fig. D6.
4. Remove a disc.
Reassembly note of the Chassis Cover:
1. Insert the pin A on the Chassis Cover into the hole
A on the Main Chassis as shown in Fig. D7.
Pin A
Hole A
2. Tighten 4 screws A as shown in Fig. D6.
Chassis Cover
Disc
Screws A
Fig. D6
Chassis Cover
Main Chassis
Fig. D7
5-8
L3250DC