Table of Contents
Advertisement
PROGRAMMING QUANTITY FOR CAPPUCCINO-LATTE MACCHIATO-WARM MILK FROTH/
預設CAPPUCCINO-LATTE MACCHIATO-暖奶泡的份量
INFORMATION: follow the steps 1-8 of section «Preparing Cappuccino and Latte Macchiato».
信息：
請按照 「調製Cappuccino及Latte Macchiato」 第1-8個步驟
3 sec.
1. Touch and hold Cappuccino/ Latte Macchiato/ Warm Warm
milk froth button for at least 3 sec. Milk frothing starts. Button
blinks fast: programming mode.
1.
長按Cappuccino/Latte Macchiato/暖奶泡按鈕至少
3秒， 開始製作奶泡。 按鈕燈快速閃動： 預設
模式。
NOTE: please refer to «Factory settings» section for
min/max programmable quantities.
注意：
請參照原廠設定最少/最多份量的
內容。
7484_UM_LATTISSIMA_RESTYLE_Z3B.indb 19
2. Release button when desired milk froth volume is reached.
Button still blinks fast: programming mode. (Cappuccino/Latte
Macchiato). When programming the Warm milk froth beverage,
the programming ends here.
2.
直至達至所想奶泡份量才放開按鈕。 按
鈕燈繼續快速閃動:預設模式(Cappuccino/Latte
Macchiato)。 當預設暖奶泡飲品， 預設已在此完
成。
3 sec.
3. Touch and hold the same button. Brewing starts. Release
button when desired coffee volume is reached. Recipe volume
is now stored for the next preparations. Button blinks 3 times to
confirm the new water volume.
3.
長按同一按鈕。 開始沖調。 直至達至所想
份量才放開按鈕。 食譜份量設定現已被儲存
作下次調製之用。 按鈕閃燈3次以確定新的食
譜份量。
NOTE: the milk froth volume depends on the kind of
milk that is used, its temperature and the position of the
milk regulator knob.
注意：
牛奶泡沫之份量視乎所使用之牛奶
種類、 其溫度及牛奶旋鈕的位置。
EN
HK
19
23.09.14 10:34
Advertisement
Table of Contents
