1. Manuals
  2. Brands
  3. Giada Manuals
  4. Computer Hardware
  5. IB4-271
  6. User manual

Giada IB4-271 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IB4-271 and is the answer not in the manual?

Questions and answers

Related Manuals for Giada IB4-271

Summary of Contents for Giada IB4-271

  • Page 2 Statement The copyright of this manual belongs to Shenzhen JIEHE Technology Development Co., Ltd. (Giada, JIEHE’s global brand) and all rights are reserved. The company reserves the right to change this manual at any time without notification. Specifications here are for reference only, please take the real product as standard.

  • Page 3: Table Of Contents

    Table of Contents 1. Product Introduction ..................6 1.1 Brief Introduction ..................6 1.2 Motherboard Picture .................. 6 1.3 Spec ......................6 2. Hardware Usage Instruction ................ 8 2.1 Dimensions Chart ..................8 2.2 Interface Definition ..................8 2.2.1 Board Jumper, Header And Interface Diagram ........ 8 2.2.2 Board Jumper And Header Definition ..........
  • Page 4 4.2.4 Hardware Monitor ................26 4.2.5 IT8786 Super IO Configuration ............. 30 4.2.6 OEM Configuration ............... 33 4.2.7 OEM ME Configuration ..............34 4.2.8 System Devices Configuration ............35 4.2.9 WakeUp Configuration ..............38 4.2.10 F81866 Super IO Configuration ........... 39 4.2.11 Serial Port 1 Configuration ............
  • Page 5 5.2.2 JAHC software installation guide ..........51 5.2.3 Startup & shutdown time setup ............53 5.3 Watchdog API and instruction ..............55 - 5 -...

  • Page 6: Product Introduction

    1. Product Introduction 1.1 Brief Introduction Giada IB4-271 Thin Mini-ITX motherboard adopts Intel Elkhart Lake J6412 (quad-core) processor, ® which has a long life cycle up to 7+ years life cycle. It is featured with HDMI + DP + LVDS display outputs, 8 ×...
  • Page 7 WiFi+BT 1 × M.2(2230) for WiFi / BT module 1 × B-Key M.2 (3042) for 3G/4G module Mobile Network 1 × SIM Slot SATA 2 × SATAIII Storage 1 × M-Key M.2(2280) for PCle SSD JAHC JAHC Watchdog Timer / Auto Power On / RTC 2 ×...

  • Page 8: Hardware Usage Instruction

    2. Hardware Usage Instruction 2.1 Dimension Chart 2.2 Interface Definition 2.2.1 Board Jumper, Header And Interface Diagram - 8 -...

  • Page 9: Board Jumper And Header Definition

    2.2.2 Board Jumper And Header Definition Jumper Function PIN Definition /Header F_AUDIO1 Front Audio SPK_6W1 Speaker SYS_FAN1 System Fan CPU_FAN1 CPU Fan Front HDMI - 9 -...
  • Page 10 F_USB2_1 Front USB2.0 CLR_CMOS1 CMOS Front USB3.0 ESPI1 DEBUG Pin LVDS1 LVDS Pin - 10 -...
  • Page 11 INVT2 Inverter Backlight Pin PWR_SEL1 LVDS/EDP Power Select F_COM5 F_COM4 F_COM6 - 11 -...
  • Page 12 F_COM3 F_COM1 F_COM2 GPIO1 GPIO F_PANEL1 Front Panel - 12 -...

  • Page 13: Accessories Installation Steps

    SATA1_PWR1 SATA_PWR SATA1_PWR2 SATA_PWR 3. Accessories Installation Steps For safety reasons, please ensure that the board is disconnected with power before installation. 3.1 Memory Installation This product only supports DDR4 SO-DIMM memory modules. 1. Locate the SO-DIMM slot on the board. 2.

  • Page 14: Wifi/3G/4G (M.2) Installation

    3.2 WIFI/3G/4G (M.2) Installation  WIFI Installation 1. Tighten the WIFI module and WIFI module bracket with screws. 2. Plug the WIFI module into the M.2 slot. 3. Secure the module to the carrier by tightening up the screw. 4. Connect the black cable to Main and grey cable to AUX. Install the antenna. - 14 -...

  • Page 15: Ssd (M.2) Installation

     3G/4G Installation 1. Plug the 3G/4G module into the M.2 slot. 2. Secure the module to the carrier by tightening up the screw. 3. Connect the cable to Main and install the antenna. 3.3 SSD (M.2) Installation 1. Plug the M-Key M.2 (2280) SSD (PCIe protocol) into the appropriate slot. 2.

  • Page 16: Sim Card Installation

    3.4 SIM Card Installation This product supports standard SIM card with the size of 25mm × 15mm. 1. [Open] the SIM card holder and pull it up. 2. Insert the SIM card. 3. [Lock] the card holder. - 16 -...

  • Page 17: Bios Setup

    The descriptions relating to BIOS setup in this Manual is for reference only since the BIOS version of the product might be upgraded. Giada provides no guarantee that all the contents in this Manual are consistent with the information you acquired.
  • Page 18 When the computer is started up, BIOS will run the self-detection (Post) program. This program includes series of diagnosis fixed in BIOS. When this program is executed, the following information will appear if any error is found: Press [F1] to Run General help Press [F2] to Load previous values and continue To enter BIOS, you can press DEL;...
  • Page 19 1) Main menu When the system enters the CMOS Setup menu, you can see the main menu on the upper part of the screen, as shown in Figure1. In this main menu, you can use the left and right direction keys to select the setup items. Once the item is selected, the lower part of the computer screen will show the details of setting.

  • Page 20: Main (Standard Cmos Setting)

    4.1 Main (Standard CMOS setting) 1) System time (hh:mm:ss) Use this item to set the time for the computer, with the format as “HH / MM / SS”. 2) System date (mm:dd:yy) Use this item to set the date for the computer, with the format as “week, MM / DD / YY”. - 20 -...

  • Page 21: Advanced (Advanced Bios Setup)

    4.2 Advanced (Advanced BIOS setup) 4.2.1 ACPI Setting - 21 -...
  • Page 22 OEM Configuration menu Description Select the highest ACPI sleep state the system  ACPI Sleep State will enter when SUSPEND button is pressed. Enable or Disable system ability to Hibernate  Enable Hibernation (OS/S4 Sleep State).This option may not be effective with some operating systems.

  • Page 23: Cpu Configuration

    4.2.2 CPU Configuration - 23 -...
  • Page 24 The menu Description CPU Configuration Max Non-Turbo Performance: the best  performance. Boot performance mode Max Battery.  Turbo performance.  Intel Virtualization Technology is enabled by default. Intel (VMX) Virtualization Technology User can enable and disable the Intel Virtualization Technology function.

  • Page 25: Trusted Computing

    4.2.3 Trusted Computing TPM20 Device Found Description Firmware Version TPM FW version is 7.63  Vendor The vendor is IFX  Disabled  Security Device Support Enabled. This item is enabled by default.  - 25 -...

  • Page 26: Hardware Monitor

    TPM20 Device Found Description Disabled. This item is disabled by default  SHA-1 PCR Bank Enabled.  Disabled This item is Disabled by default.  SM3_256 PCR Bank Enabled.  Pending operation It includes None and TPM Clear function.  Platform Hierarchy Disable or Enable the Platform Hierarchy.
  • Page 27 - 27 -...
  • Page 28 Fan 1 Setting Description The Fan1 is used for system. It includes "Automatic mode" and "software mode". Smart Fan 1 Mode Automatic mode. Automatic mode is enabled by default.   Software mode. - 28 -...
  • Page 29 Fan 1 Setting Description FAN will stop work If temperature is lower than the Fan off  Fan off temperature limit temperature limit value. If the temperature is higher than fan off temperature limit,  Fan start temperature limit FAN will start work. If the temperature is higher than the FAN Full Speed temp ...

  • Page 30: It8786 Super Io Configuration

    4.2.5 IT8786 Super IO Configuration - 30 -...
  • Page 31 Serial Port Description Serial Port 1 Configuration Device Settings Set parameters of serial port.IO=3F8H;IRQ=4 Select an optimal settings for super IO device. Auto IO=3F8h; IRQ=4; Change Settings IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; The user can set it as rs232 、 RS422 and RS485.The port is RS232 by Serial Port 1 Mode Configuration default.
  • Page 32 Serial Port 3 Configuration Device Settings Set parameters of serial port.IO=3E8H;IRQ=7 Select an optimal settings for super IO device. Auto IO=3E8h; IRQ=7; Change Settings IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Serial Port 4 Configuration Select an optimal settings for super IO device. IO=2E8h;...

  • Page 33: Oem Configuration

    4.2.6 OEM Configuration OEM Menu Description OEM Configuration  JIEHE Active Hardware Control (JAHC) management system includes both hardware Micro JAHC Enable Control Unit (MCU) and software (JAHC Technology Manager). Disabled: The JAHC is disable by default.  - 33 -...

  • Page 34: Oem Me Configuration

    OEM Menu Description Enabled.  4.2.7 OEM ME Configuration - 34 -...

  • Page 35: System Devices Configuration

    4.2.8 System Devices Configuration - 35 -...
  • Page 36 - 36 -...
  • Page 37 IDE Configuration menu Description SATA Controller. Serial-ATA(SATA) Disabled.  Enabled: The SATA controller is enabled by default.  Enable/Disable Serial-ATA Port0 Serial-ATA Port 0 Enabled  Disabled  Enable/Disable Serial-ATA Port1 Serial-ATA Port 1 Enabled  Disabled  SATA Port0 Current SATA Port0 device model SATA Port1 Current SATA Port1 device model...

  • Page 38: Wakeup Configuration

    4.2.9 WakeUp Configuration WakeUp Configuration menu Description The user can set up automatic startup by Fixed Time Resume On RTC Alarm Enabled.  Disabled. The RTC function is disabled by default.  If this item is enabled, the user can wakeup PC by USB from S3 or S4 Resume On USB Disabled.

  • Page 39: F81866 Super Io Configuration

    4.2.10 F81866 Super IO Configuration F81866 Super IO Configuration menu Description Super IO Chip It shows chip type Enabled.  Serial Port 1 Configuration Disabled.  Enabled.  Serial Port 2 Configuration Disabled.  Enabled.  Serial Port 3 Configuration Disabled.

  • Page 40: Serial Port 1 Configuration

    4.2.11 Serial Port 1 Configuration Serial Port Description Serial Port The user can set it as enabled or disabled Device Settings Set parameters of serial port Change Settings Select an optimal settings for super IO device. - 40 -...

  • Page 41: Pc Health Status

    4.2.12 PC Health Status PC Health Status menu Description CPU temperature The Current CPU temperature Fan1 speed The Current Fan speed 4.2.13 CPU Configuration - 41 -...

  • Page 42: Cpu Configuration

    CPU Configuration Menu Description It includes CPU models, CPU Signature, Microcode Patch, Max CPU Speed, Min CPU Speed, Processor Socket 0 CPU Information Cores, Intel HT Technology, Intel VT-X Technology, L1 Data Cache, L1 Code Cache, L2 Cache, L3 Cache. CPU Thermal Configuration Digital Thermal Sensor.

  • Page 43: Ppm Configuration

    4.2.15 PPM Configuration PPM Configuration Menu Functions Description Enabled/Disabled CPU C state report to OS CPU C state Report Disabled:  Enabled.  This option controls Max C state that the processor will support. Max CPU C-state    Enabled ...

  • Page 44: Ide Configuration

    4.2.16 IDE Configuration IDE Configuration menu Description SATA Controller. Serial-ATA(SATA) Disabled.  Enabled: The SATA controller is enabled by default.  Disabled  SATA Test Mode Enabled  Set SATA Speed SATA Speed Support Gen2  Gen1  Current SATA ODD device list Port0 ODD: ...

  • Page 45: Security (Set The Administrator/User Password)

    IDE Configuration menu Description Enable/Disable Serial-ATA Port1 Hotplug function SATA Port1 HotPlug Enabled  Disabled  SATA Port0 Current SATA Port0 device model SATA Port1 Current SATA Port1 device model Network Configuration Enabled/Disabled UEFI PXE ROM Network Stack Enabled  Disabled ...

  • Page 46: Boot Menu

    Once you enter it again, BIOS will save the set password. Once the password item is enabled, you will be required to enter the password every time before the system entering to the setup program of BIOS. The user can set this item through the Security Option in advanced BIOS properties. If the Security Option is set as System, the password will be required to be entered before both the system guides and entering to the setup program of BIOS.

  • Page 47: Save & Exit

    Boot Item Description Options are OFF and ON. In other words, this item can be used to set the state of Num Lock after entering the Bootup NumLock State system. It can be set according to user's needs and doesn’t affect the performance of the computer. If this item is set as Enabled, the system can be started within five seconds and some detection items Quiet Boot...

  • Page 48: Jahc Introduction

    Save Exit Item Description Discard Changes and Exit Give up the settings and exit. Boot Override Whole Boot devices 5. JAHC Introduction JIEHE Active Hardware Control (JAHC) management system includes both hardware Micro Control Unit (MCU) and software (JAHC Technology Manager). It can support following functions: 1.
  • Page 49 b. Select Advanced- > OEM configuration- > JAHC Switch- > Enabled. c. Press ‘F10’ to save change & exit after select “JAHC enabled” option. - 49 -...
  • Page 50 - 50 -...

  • Page 51: Jahc Software

    Supported operation system: Windows 10 64bit, Linux 64bit. How to install JAHC software: Please download the JAHC.EXE from Giada website: www.giadatech.com, then follow up below steps: a. Double-click the JAHC.EXE file, the setup wizard will pop up, select destination location and click [Next] button to continue the installation.
  • Page 52 c. Select [Create a desktop shortcut] and click [Next] button. d. Click [Install] button to continue the installation. - 52 -...
  • Page 53 e. Click [Finish] button to finish the installation. You can select [Launch JAHC] to run the software automatically after finishing the installation. Notice: The JAHC will be added into boot item when it is installed. It will start up when system boot 5.2.3 Startup &...
  • Page 54 One week as a circle, maximum 3 schedules per day. Select each schedule to set up the resume time and shutdown time. Click [Confirm] button to launch the schedule. After finishing the setup, the menu window will notice the resume time and shutdown time. Caution: If the interval from shutdown time to next resume time is less than 3 minutes, the system will not shut down.
  • Page 55 You can click [Delay] button and set up the time to delay the shutdown or click [Cancel] button to cancel the shutdown. 5.3 Watchdog API and instruction Please contact Giada FAE (email:support@giadatech.com) for watchdog API software and instruction. - 55 -...
  • Page 56 - 56 -...

Table of Contents