Skil OS5937-00 Owner's Manual page 17

Using with Flush Circular Blade
(Fig .10)
WARNING
Always wear safety goggles or safety
–
glasses with side shields during power
tool operation . If the operation is dusty,
also wear a dust mask .
Wear protective gloves .
–
Use sharp, undamaged blades only .
–
Deformed or blunt blades or blades that
are otherwise damaged can break .
WARNING
backward, as operation in this position may
cause serious injury (Fig. 10a).
The flush circular blade is ideal for making
cuts in wood, plaster, drywall, non-ferrous
metals, thin sheet metal, and other materials.
The blade works best on softer woods, such
as pine. For harder woods, the blade life
will be limited. Allow the tool to reach its full
selected speed before allowing it to contact the
workpiece.
Do not attach the flush
circular blade facing
X
Fig.10a
Fig. 10b
17