Cancelling The Programme; Salt Indicator ( ) - Blomberg DWT 59500 FBI User Manual

C
MODEL DEPENDING:
Your machine performs
water softening depending
on the hardness level of
the supply water. Washing
time can change while
the programme is running
depending on the ambient
temperature where your
machine is installed,
temperature of the supply
water and amount of the
dishes.
C
Pay attention not to open the
door of the machine when
it is running. There may
be a rush of vapour when
you open the door of your
machine; be careful.
C
The machine will be
switched off if no button is
pressed within 5 seconds
after opening the door while
the machine is running.
C
After the door has been
opened, if any button is
pressed within 5 seconds
and the door is closed,
the selected programme
resumes; otherwise, the
machine will be switched off.
Open the door after the
machine has been switched
off, press On/Off button
and close the door within 5
seconds. The programme
will resume washing.
C
The machine will remain
silent in pause mode for
some time in order to
remove the water from the
machine and on the dishes
completely and to have the
water softener cleaned, and
then it will resume running in
drying mode.
6.7 CANCELLING THE
PROGRAMME
Open the door of the product Press
and hold the Programme Selection
/ Programme Cancel keys for 3
seconds. After the 3 - 2 - 1 countdown,
0:01 is displayed, close the door of
the product and wait for the draining
process complete. Draining is
completed in 2 minutes and the
machine gives an audible warning
when it is completed.
C
There might be residues
of detergent or rinse aid
in the machine and/or on
the pieces being washed
depending on the step
the programme you have
cancelled was in.

6.8 SALT INDICATOR ( )

(MODEL DEPENDING)
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt indicator appears on the
display of your machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
23
USA