Preparing The Machine; Programme Selection - Blomberg DWT 59500 FBI User Manual

draining process complete. Draining
is completed in 2 minutes and the
machine gives an audible warning
when it is completed.
Function keys
If you press any of the Function keys
during programme selection or time
delay selection, an affirmative key
signal will be heard provided that the
relevant function is supported by the
selected programme. Function will be
deemed selected when the indicator of
the selected function is lit.
To cancel the selected function, keep
the function key pressed until the
function indicator disappears.
6.2 PREPARING THE
MACHINE
1. Open the door of the dishwasher.
2. Place the dishes in accordance
with the instructions in the user
manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent
into the detergent dispenser.

6.3 PROGRAMME SELECTION

1. Press the On/Off button to turn on
your machine.
2. Check the Salt and Rinse Aid
indicators and add salt and/or rinse
aid if needed.
3. Refer to the table of "Programme
data and average consumption
values" to determine a washing
programme suitable for your
dishes.
4. Selected programme will start
when you close the door of your
machine.
18
USA