Check The Leds; Set Up Your Computer's Ip Address - ZyXEL Communications ZyXEL Dimension ES-315-F Quick Start Manual

Intelligent layer 2 managed switch

Hide thumbs Also See for ZyXEL Dimension ES-315-F:

Table of Contents

Use only the power adaptor that came with the

ES-315-F.

2.3 Check the LEDs

Look at the LEDs (lights) on the front of the ES-315-F.

• The PWR/SYS LED turns green if the power is on.

• The LAN 1, 2, 3 or 4 and WAN LEDs turn on when the corre-

sponding ports are properly connected, and blink when there

is traffic.

If one of the LEDs does not behave as

expected, check the connection. Make sure the

device to which the corresponding port is

connected is turned on and working normally. If

this does not help, turn the ES-315-F off and on

again.

This section shows you how to set up your computer to

access the ES-315-F.

ES-315-F Quick Start Guide

Table of Contents