Related Manuals for Plasmapp ACTILINK Reborn
Summary of Contents for Plasmapp ACTILINK Reborn
- Page 1 User Manual Plasmapp Co., Ltd. 59, Seocho-daero 77-gil, Seocho-gu, Seoul, Republic of Korea www.plasmapp.com PN LA2-0026-00 | ACTILINK Reborn User Manual ACTILINK Reborn User Manual |...
-
Page 2: Table Of Contents
Welcome ▪ You should read this manual before using the plasma activator. Thank you for purchasing the ACTILINK reborn plasma activator. Please read this User Manual very carefully before using the product. ▪ Be sure to know the configuration of the plasma activator, and how to operate it. -
Page 3: Safety Information
2. Safety information Plasmapp puts user safety first, and this chapter provides information on how to safely Safety Instructions use the plasma activator. Users must read and understand these safety information Be sure to use only the power cords specified for this product and approved and instructions before using the plasma activator. -
Page 4: Product Composition
4. About the Plasma Activator Purpose The ACTILINK reborn plasma activator is a product used to clean the surface and improve hydrophilicity by removing impurities through the surface treatment of Implant Fixture. It is effective, safe, fast, economical, and easy to use, providing reliable surface activation. - Page 5 Implant Fixture. Step 2 process (vacuum purification): Exhausting impurities are removed from the surface of ③ the Implant Fixture through the plasma surface activation process, by using a vacuum pump. | ACTILINK Reborn User Manual ACTILINK Reborn User Manual |...
-
Page 6: How To Use The Plasma Activator
Press the “On” button to start the When the process is completed and surface activation process. the vacuum tube rises, retrieve the Rocket Holder. | ACTILINK Reborn User Manual ACTILINK Reborn User Manual |... - Page 7 ※ Refer to “6. Troubleshooting” same time, the tube rises with an “End Sound” to indicate that the process is done. When the tube rises fully, retrieve the Rocket Holder. | ACTILINK Reborn User Manual ACTILINK Reborn User Manual |...
-
Page 8: Troubleshooting
· Check the power cable. You should use the power cable/grounding type plugs supplied with the product. · Check the power button. ※ If the power turns off repeatedly during the process, please contact the distributor. | ACTILINK Reborn User Manual ACTILINK Reborn User Manual |... - Page 9 After exceeding the number of uses of the product, ▪ the “Blinking red LED” status appears on the front of the prototype to start the process and the product does not operate. Blinking | ACTILINK Reborn User Manual ACTILINK Reborn User Manual |...
-
Page 10: How To Manage After Use
30% to 85%. ▪ When the product is moved from the initial installation location to another location, the location must be changed by a professional engineer approved by the salesperson. | ACTILINK Reborn User Manual ACTILINK Reborn User Manual |... -
Page 11: Warranty
We are not responsible for any accidents such as product damage due to use other than the ※ instructions specified in this manual. Manufacturer Company name Plasmapp Co., Ltd. Address (41061) 102, Cheombok-ro, Dong-gu, Daegu, South Korea Website www.plasmapp.com Customer Service +82-1544-0508 | ACTILINK Reborn User Manual ACTILINK Reborn User Manual |... - Page 12 MEMO MEMO | ACTILINK Reborn User Manual ACTILINK Reborn User Manual |...
Need help?
Do you have a question about the ACTILINK Reborn and is the answer not in the manual?
Questions and answers