Celestron 44308-B Instruction Manual page 6

3. USING YOUR MICROSCOPE
A. CONNECTING
Connect the microscope to your computer via the USB
+
2.0 cable.
Click on the Micro Capture Pro desktop icon
+
to launch the software.
Your microscope should automatically connect and begin
+
streaming images.
NOTE:
If the microscope is not connected to the USB port, the following error
message will be displayed: "No device detected. Please connect your
microscope directly to an open USB port. "
B. FOCUSING
To focus on an image using the included stand:
+
Adjust the height of the carriage holding the microscope.
+
Tighten the Carriage Height Adjustment Lock Nut (4) to
+
hold in place.
1.
1.
Once satisfied with the position, tighten the Lock Wheel
+
(1), securing the carriage in place.
6
I ENGLISH
4.
4.
Turn the Height Adjustment Wheel (2) to set the coarse focus.
+
Now, rotate the Focus Wheel (3) to set the fine focus.
+
2.
2.
3.