Table of Contents
Advertisement
Make sure MP Drivers are installed correctly.
Check3
Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and click
here to reinstall them.
When printer is connected to your computer with a USB cable, check device
Check4
status from your computer.
Follow the procedure below to check the device status.
1.
1. Select Control Panel > Hardware and Sound > Device Manager.
Note
• If the User Account Control screen appears, select Continue.
2.
2. Open USB Printing Support Properties.
Double-click Universal Serial Bus controllers and USB Printing Support.
Note
• If the USB Printing Support Properties screen does not appear, make sure the printer is
•
correctly connected to the computer.
Check2
3.
3. Click General tab and check for a device problem.
If a device error is shown, see Windows Help to resolve it.
Other Error Messages (Windows)
If an error message appears outside printer status monitor, check the
Check
following:
•
• "Could not spool successfully due to insufficient disk space"
Delete any unnecessary files to increase the amount of free space on the disk.
•
• "Could not spool successfully due to insufficient memory"
Close other applications to increase the available memory.
If you still cannot print, restart your computer and retry the printing.
• "Printer driver could not be found"
•
Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and
click here to reinstall them.
•
• "Could not print Application name - File name"
Try printing again once the current job is complete.
Make sure printer is properly connected to computer.
398
Advertisement
Table of Contents
