Garland GRASS 600 LE Instruction Manual page 22

English
INDEX
1. Introduction
2. Normative and security measures
3. Warning signs
4. Machine symbols
5. Machine description
6. Start up instructions
7. Machine usage
8. Maintenance and service
9. Troubleshooting
10. Transport
11. Storage
12. Recycling and machine disposal
13. Warranty conditions
CE Declaration of conformity
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Ref.:GCCGRASS600LEM1112V1
DATE OF PUBLICATION: 05/11/2013
DATE OF REVISION: 02/02/2015
1. INTRODUCTION
22 Thank you for choosing a Garland machine. We are
sure that you will appreciate the quality and functions
23 of this machine that will facilitate your daily work for
a long time. Remember that this machine has a wide
27 of network of after sales services to which you can
take your machine for any maintenance necessary on
27 your machine, in case of any troubleshooting and for
purchasing spare parts and accessories.
28
Attention! Read all the warning signs and
30 all the instructions. The non observance
of the warning and instructions detailed from here
32 on can result in a fire being caused and/or a serious
injury. Before using the nachine, read carefully the
34 information in this manual on a secure and correct
start up.
36
Only cut grass. Do not use this machine for
37 other uses for which the machine has not been
designed to carry out. For example: do not use
37 the lawnmower to cut brush, to cut hay or small
bushes and do not use as a shredder. The use of
37 the lawnmower for unintended jobs could result in
dangerous situations.
38
Keep all the warning signs and the manual
39 in a safe place for future reference. If you sell or
otherwise dispose of the machine, please pass on the
instruction manual as it forms part of the machine.
The expression ¨machine¨ on the warning signs makes
reference to this electric machine connected. The
expression ¨switch in the open position¨ means that
the switch is disconnected and ¨switch in the closed
position¨ means that the switch is connected.
Remember that the end user is responsible for
accidents and damages caused to himself, to third
parties and to things.
22/120