Nolan X Series User Instructions And Safety
  1. Manuals
  2. Brands
  3. Nolan Manuals
  4. Conference System
  5. X Series
  6. User instructions and safety

Nolan X Series User Instructions And Safety

Hide thumbs Also See for X Series:
Table of Contents

Advertisement

Quick Links

Download this manual
EN
USER INSTRUCTIONS AND SAFETY
Congratulations on your purchase of a Nolangroup N-Com product.
N-Com B901 was made using the most advanced technologies and the best materials.
Long-running tests and thorough system development have allowed the highest audio
quality to be achieved.
For additional information about B901, and to download high-definition instructions as
well as the latest Firmware version, visit the website www.n-com.it
Firmware Version: 1.4
REFERENCE STANDARDS
The products of the N-Com line are in compliance with standards as per the table below:
B901
Battery
charger
Battery
The Declarations of Compliance can be downloaded from the website www.n-com.it (Download
section).
Model: B901 X
PMN: N-Com B901 X
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by N-Com is under license. Other trademarks and trade names are those
of their respective owners.
The Bluetooth system complies with the main safety requirements and
other applicable provisions of Directive RED 2014/53/EU, Directive
2009/65/EC, Directive 2011/65/CE, Directive 2012/19/EU
Directive 2014/35/EU LVD, 2014/30/EU EMC, 2009/125/CE ErP,
2011/65/EU RoHS, 2012/19/EU WEEE
Directive 2001/95/CE – GPSD, 2013/56/UE BAT, 2014/30/EU
FCC ID:
Y6MNCOM21
IC: 9455A-NCOM21
R-NZ
Fw 1.4-3 - 02/07/2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nolan X Series

Summary of Contents for Nolan X Series

  • Page 1 USER INSTRUCTIONS AND SAFETY Congratulations on your purchase of a Nolangroup N-Com product. N-Com B901 was made using the most advanced technologies and the best materials. Long-running tests and thorough system development have allowed the highest audio quality to be achieved. For additional information about B901, and to download high-definition instructions as well as the latest Firmware version, visit the website www.n-com.it Firmware Version: 1.4...

  • Page 2: Table Of Contents

    Contents WARNINGS AND SAFETY ............................3 1.1.Road safety ......................................3 1.2.Switching on the system in safe environments ........................3 1.3.Interferences ......................................3 1.4.Appropriate use ....................................3 1.5.Qualified personnel ................................... 4 1.6.Accessories and batteries ................................4 1.7.Disposal ......................................... 4 CONTENT OF THE PACKAGING ..........................5 INSTALLATION ON THE X-903 HELMET........................6 3.1.Preliminary operations..................................

  • Page 3: Warnings And Safety

    WARNINGS AND SAFETY Read this User Manual carefully, as well as the simple rules listed below. Failure to comply with these rules may lead to dangerous situations. Caution: The product cannot be used in official or non-official competitions, motordromes, circuits, racing tracks and the like.

  • Page 4: Qualified Personnel

    Caution: An incorrect installation of the system in the helmet may alter the aerodynamic and safety characteristics of the helmet itself, thus creating dangerous conditions. Install the N-Com system according to the instructions provided in the product documentation. In case of doubt, please contact your local N-Com dealer. Warning: Listening to other equipment should not interfere with driving the vehicle, which must be the top priority at all times.

  • Page 5: Content Of The Packaging

    CONTENT OF THE PACKAGING The N-Com B901 package contains: e-box with wiring Rechargeable battery Battery charger Adesive Keypad Microphone Microphone for helmet X-903 Mini USB jack wire Flat head tool Microphone foam Key, Screw, Microphone Microphone securing Adhesive strips securing clip stickers for loudspeakers...

  • Page 6: Installation On The X-903 Helmet

    INSTALLATION ON THE X-903 HELMET The X-903 helmet is pre-set for the EASYFIT simplified installation of the N-Com system. Important: Prior to installing the N-Com system, it is recommended to write down the identification code affixed to the product (see chapter 20.5). The installation video can be seen at www.n-com.it / Support section.
  • Page 7 Note: In the event that the keyboard is not positioned correctly, peel it off right away with extreme care and repeat the positioning. Note: It takes up to 24 hours for the keyboard to stick completely. During this time, do not expose the helmet to atmospheric agents.

  • Page 8: Positioning The Microphone In The X-903 Helmet

    Fig. 13 Fig. 14 Fig. 12  Position the left loudspeaker in its seat, inserting the cable in the special groove. If necessary, secure the earphone using the adhesive supplied as standard equipment (Fig. 15). Fig. 15 3.3. Positioning the microphone in the X-903 helmet ...

  • Page 9: Repositioning The Padding

     Pass the USB mini wire through the elastic band found on the comfort padding (Fig. 20).  Position the wiring in the rear part of the helmet (Fig. 21). Fig. 20 Fig. 21  Connect the battery to the wiring system (Fig. 22). ...

  • Page 10: Installation On The X-Lite Helmets

    INSTALLATION ON THE X-LITE HELMETS This procedure must be followed for the installation of N-Com systems on X-lite helmets other than model X-903. Important: Prior to installing the N-Com system, it is recommended to write down the identification code affixed to the product (see chapter 20.5). The installation video can be seen at www.n-com.it / Support section.
  • Page 11 ONLY FOR X-702 HELMET: Position the battery connector and wiring underneath the  shell gasket (Fig. 30).  Cut along the pre-cut lines of the plastic tab on the back of the comfort padding (Fig. 31). Secure the wiring underneath the plastic tab. Close the cut ...
  • Page 12 Note: In the event that the keyboard is not positioned correctly, peel it off right away with extreme care and repeat the positioning. Note: It takes up to 24 hours for the keyboard to stick completely. During this time, do not expose the helmet to atmospheric agents.

  • Page 13: Microphone Positioning

    Fig. 42 Fig. 43 4.3. Microphone positioning JET HELMETS  Insert the microphone securing clip. Note: The flat part of the clip has to face upward when the microphone is positioned as shown in Fig. 44.  Position the microphone on the left side of the helmet, screwing in the screw in the small shell frame (Fig.

  • Page 14: Repositioning The Padding

    Fig. 48 Fig. 49  Connect the microphone to the connector coming out of the e-Box (Fig. 50).  Position the left-hand side speaker in the cheek pad housing and secure it using the specific adhesive (Fig. 51).  Reposition the left polystyrene cheek pad in its housing. ONLY FOR FULL-FACE HELMETS: Insert the chin strap into the polystyrene cheek pad loop.

  • Page 15: Removing The System

    REMOVING THE SYSTEM To remove the system from the helmet, proceed as for the installation, by removing the various parts. Important: to remove the keypad support, proceed as follows.  Remove the keypad support from the helmet shell (Fig. 52). ...

  • Page 16: Basic Functions

    BASIC FUNCTIONS Note: Before using the N-Com device for the first time, recharge the battery completely for at least 10 hours. To obtain best performances from the battery, it is recommended to completely recharge the battery the first few times. Afterwards, you can recharge the battery for shorter periods. Whenever possible, it is best to recharge the battery completely.

  • Page 17: Configuration Menu

    CONFIGURATION MENU All Bluetooth pair ups and other adjustments are carried out in this mode. To put the system in “Configuration mode” (starting from a switched off system) press the “ON” key and keep it pressed for 4 seconds, until you hear the voice announcement “ Configuration ”. Once in the “Configuration”...

  • Page 18: Pairing Up With Mobile Phones Or Other Bluetooth Devices

    PAIRING UP WITH MOBILE PHONES OR OTHER BLUETOOTH DEVICES  Make sure the B901 is turned off. Put the system in the “Configuration” mode, then press the “ON” key and keep it pressed for 4  seconds, until you hear the voice announcement “ Configuration ”. ...

  • Page 19: Conference Call Function

     On your own mobile phone (paired up and connected to the N-Com system), call the phone number you wish to assign to the selected speed dialling position. The call is interrupted before it goes through, and the selected number will be saved; at this point you will hear the special voice announcement confirming the selection (“...

  • Page 20: Managing Two Mobile Phones (Or Bluetooth Devices)

    10. MANAGING TWO MOBILE PHONES (OR BLUETOOTH DEVICES) The B901 system can be hooked up to two phones (or Bluetooth) devices at the same time. The second phone (secondary device) can receive calls but not make them. To pair up the second Bluetooth phone (secondary device): ...

  • Page 21: Sharing Music Via Bluetooth (A2Dp Sharing)

    12.1. Sharing music via Bluetooth (A2DP Sharing) During the intercom connection, you can start playing music by briefly pressing the “ON” key. The music will be played in both systems. Music sharing temporarily cuts off the intercom conversation; however, this can be automatically restored by stopping the music (this is done by briefly pressing the “ON”...

  • Page 22: Intercom

    16. INTERCOM The N-Com B901 system allows communication with other N-Com systems, up to a maximum distance of about 300 m (in open field, with no obstacles). The range of the communication varies depending on the N-Com systems used. N.B.: The range and quality of the communication may vary significantly depending on the presence of obstacles, weather conditions, and magnetic fields.

  • Page 23: Intercom Function (One-To-One Connection)

    Pairing up CHANNEL 1 Briefly press “n”. Pairing up CHANNEL 2 Press the “n” key twice. Pairing up CHANNEL 3 Press the “n” key three times. The Intercom connection with the selected channel is automatically activated at the end of the pair up procedure.

  • Page 24: Smart Conference (Group Intercom)

    The temporary disabling of the VOX function is then removed the first time the N-Com device is turned off; so, if the VOX is enabled (from PC or APP), it will be restored the next time the device is switched on. Note: The VOX function can be used EXCLUSIVELY with “900”...

  • Page 25: Universal Intercom" Intercom

    17. “UNIVERSAL INTERCOM” INTERCOM The N-Com B901 system can be connected via Bluetooth to intercom systems of other brands, thanks to the UNIVERSAL INTERCOM function. 17.1. Pairing up the UNIVERSAL INTERCOM The N-Com system can be paired up to the other intercom (from now on referred to as Intercom B) as if it was a mobile phone.
  • Page 26 System A has to initiate the first intercom connection with system B (Universal Intercom), by pressing the relative intercom connection command. At this point, system C can join the intercom conference call, establishing an intercom connection with system A. The three systems are now in intercom conference call mode and can talk to each other at the same time.

  • Page 27: Remote Control

    18. REMOTE CONTROL The B901 device can be controlled by using a remote control (sold separately), so that you do not have to take your hands off the handlebars to use the keypad. The N-Com system is compatible with the RC4 Remote Control by SENA. The following table shows the correspondence of the keys: N-COM SYSTEM ▲...

  • Page 28: Battery And Recharge

    19. BATTERY AND RECHARGE 19.1. Low battery signal During its operation, the system alerts the user with a voice message when the battery is low. From the first message, the system has a 1-hour autonomy. Warning is given every 10 minute. 19.2.

  • Page 29: Summary Table Of Controls

    20. SUMMARY TABLE OF CONTROLS    Button  Turning on 2 sec Turning off 6 sec Increase Volume Decrease Volume Answer phone call* Voice call 2 sec Speed Dialling Menu** Hang up/reject a phone call 2 sec Manual Device Connection 2 sec Phone Conference Activation CHANNEL 1...

  • Page 30: Limited Warranty

    21. LIMITED WARRANTY With this LIMITED WARRANTY CERTIFICATE, Nolangroup warrants this Product to be free from defects in material and workmanship at the time of its original purchase by the buyer. We invite you to:  Read the cautions pertaining to safety and proper use. ...

  • Page 31: Validity Of This Limited Warranty

    21.3. Validity of this limited warranty This warranty is valid only if the enclosed warranty form is duly and completely filled out with the following information:  Product identification code  Name and stamp of the authorized dealer.  Product purchase date. ...

  • Page 32: Warranty Registration Form

    22. WARRANTY REGISTRATION FORM Product name B901 X SERIES Identification code Buyer’s Information Name Last name Address Phone e-mail Dealer’s stamp Date of purchase...

This manual is also suitable for:

B901

Table of Contents