Table of Contents
Advertisement
Use of timer turn off function for corresponding heater (available only for
model EBC311DB)
After reaching a remaining time of 0 minutes, the timer stops the linked
heater, showing the ´0` shown in the Heater Display and shuts down Timer
Display. In the Timer Display is shown ´00`. The related timer Cooking Zone
Indicator disappears.
An assigned Dual/Triple Zone Selection Indicator also disappears if it is
active.
Additionally the buzzer indicates acoustically the timer run out. After
confirmation of the timer run out by touching any button, the buzzer goes
silent.
Timer Function (available only for model with Timer function -
EBC311DB)
The timer provides following features:
The control can run max. 4 heater assigned timers and 1 minute minder
(which is assigned to no heater) simultaneously.
All timers can be used only in B-Mode. A heater timer can only be assigned to
a active heater, running in levels between 1-9. The minute minder is
independent of any heater.
In order to use both functions, timer function must be activated by the
Active/Deactive Timer button
Touching
for the fist time after activating the heaters, the control proposes
the minute minder (no Cooking Zone Indicator is flashing, they are all on
or off).
Touching
for the second time, the control proposes the assignment to
one of the activated heaters by flashing Cooking Zone Indicator. Now the tim
er to the linked timer signalised.
Touching
again, the next timer in the in the clockwise direction, is
proposed for assignment of the next active heater. And so on…
(Only for model with timer function - EBC311DB)
.
Advertisement
Chapters
Table of Contents
