Turn Off Individual Heaters - Vox EBC315 DB Operating Instructions Manual

The heat boost can be turned off by pressing
appears.
If the heat boost should be used, it can always be activated by actuating
again if the heat setting is set to level 9. In the heat display ´A/9` flashes.

Turn Off Individual Heaters

A selective heater can be turned off with 3 different ways:
. Simultaneous operation of
· Reduction of the heat setting to ´0` by operating
nction for the corresponding heater
Simultaneous operation of
The corresponding heater must be chosen with the Active/Deactive Heater
Button , the Decimal Point of the related Heater Display flashes. To turn
off the heater, and
signal sounds and ´0` appears in the heat setting display.
If the timer is active for the selected heater, then ´0` will appear in the heater
display and also the related timer Cooking Zone Indicator Timer Function
and the Timer Display is turned off.
EBC311DB)
If there is a residual heat for this heater remaining, this will be indicated by
a static display ´H` in the heat setting display.
Reduction of the heat setting to ´0` by operating
The heater can also be turned off by reducing the operated heat setting to
´0`.
When Heater Display indicates ´0`, an associated Decimal Point of the
heater will also be turned off.
Turning off an active heater, not only the ´0` appears in the Heater Display,
but also the related timer Cooking Zone Indicator and the Timer Display is
turned off.
(Only for model with timer function - EBC311DB)
If there is a residual heat for this heater remaining, this will be indicated by
a static display ´H` in the heat setting display.
and buttons
(Only for model with timer function - EBC311DB)
and buttons
must be pressed at the same time. A buzzer
(Only for model with timer function -
13
until heat setting ´0`
button · Use of timer turn off fu
button