Paper Does Not Feed Properly/"No Paper" Error - Canon PIXMA TS3120 Online Manual

Paper Does Not Feed Properly/"No Paper" Error

Make sure paper is loaded.
Check1
Loading Paper
When loading paper, consider the following.
Check2
• When loading two or more sheets of paper, align the edges of the sheets before loading the paper.
• When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load
limit.
However, paper may not feed correctly at the maximum capacity, depending on the type of paper or
environmental conditions (very high or low temperature and humidity). In such cases, reduce the amount of
paper you load at a time to less than half of the paper load limit.
• Always load the paper in portrait orientation, regardless of the printing orientation.
• When you load the paper, load the paper with the print side facing UP. Align the paper stack against the
right side of the rear tray and slide the paper guide so that it just touches the left edge of the stack.
Loading Paper
Is paper too thick or curled?
Check3
Unsupported Media Types
Make sure media type and paper size settings match with loaded paper.
Check4
Make sure that there are not any foreign objects in the rear tray.
Check5
If the paper tears in the rear tray, see
If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply,
then remove the foreign object.
List of Support Code for Error (Paper Jams)
301
to remove it.