Winch Assembly
Introduction
Feature
4,309 kg / 9,500 lb synthetic rope first layer
Line pull:
Synthetic rope: 10 mm × 30.5 m (3/8"×100') synthetic rope
Brake:
Patented cone brake holds full load
Clutch:
Turn the T-handle for rapid rope payout
Control:
Handheld pendant switch powers the winch
Unpacking
.Winch assembly................................................................... 1 pc
. Control box............................................................................. 1 pc
.Remote control.................................................................... 1 pc
. Synthetic rope with sling hook............................................... 1 pc
.Hawse fairlead.................................................................... 1 pc
.1.8 m (6') 2 gauge battery lead............................................... 1 pc
. Wireless Transmitter............................................................. 1 pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
Winch and hawse fairlead mountings
It is very important that the winch will be
mounted on a flat and hard surface of
mounting channel in order to make sure
the motor, drum and gearbox housing are
aligned correctly.
Hawse fairlead does not mount to the
winch directly.
Self-Recovery Winch
Model: Seal Gen2 9.5rs
PN: 295850 12V DC