Table of Contents
Advertisement
Installation
Installation requirements
Electrical supply and grounding
WARNING
•
AC 230-240 V / 50 Hz (Malaysia),
AC 230 V / 60 Hz (Philippines) fuse or
circuit breaker is required.
•
Use an individual branch circuit specific
to the washing machine.
•
Do NOT use an extension cord.
•
Use only the power cord that comes
with the washing machine.
•
Do NOT connect the ground wire to
plastic plumbing, gas lines, or hot water
pipes.
•
Do not remove or modify the grounding
pin of power cord to reduce the risk of
electric hazard.
•
Please use the additional grounding wire
provided with this appliance if there
is no hole for earth pin in power inlet
socket.
Levelling
To prevent tumbling or noise, install the
•
washing machine on a solid, flat floor
without a platform or bricks.
•
Keep the washing machine at 10 cm
from each adjacent wall.
Water supply
•
Make sure water taps are easily
accessible.
•
Turn off the taps when the washing
machine is not in use.
•
Check for any leaks at the water hose
fittings on a regular basis.
12 English
WA5700JS_DC68-03517B-05_EN.indd 12
Drain
•
Make sure the drain hose is not clogged.
•
We recommend a standpipe in height
of 90-100 cm. The drain hose must be
connected through the hose clip to the
standpipe, and the standpipe must fully
cover the drain hose.
The standpipe specifications mentioned
here are only applicable to pump-type
models.
2018-11-15
6:15:42
Advertisement
Table of Contents
