Table of Contents
Advertisement
Preparation
Remove the test
Turn on the tap and
strip from the
let the water run for
packet.
about a minute.
After determining hardness level of the supply water:
1. After turning on your machine, press and hold the Time Delay and Start/Pause/Cancel
keys respectively.
2. Using the Time Delay key, turn on 9 and 3 LEDs.
3. Use the function keys to adjust the water hardness level.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
English Water
Level
Hardness °dE
Level 0
0-5
Level 1
6-9
Level 2
10-15
Level 3
16-19
Level 4
20-24
Level 5
25-62
In order to protect your glassware against glass corrosion in an optimal way, you have to
perform the same hardness settings, which you have made in the control panel, with the
regeneration setting switch.
For example, if you have adjusted to "3rd level" in the control panel, also set the regeneration
adjustment switch to 3rd level.
Regeneration Adjustment Switch
/
Hold the test strip in
the water for about
a second.
German Water
French* Water
Hardness °dH
Hardness °dF
0-4
0-8
5-7
9-13
8-12
14-22
13-15
23-27
16-19
28-34
20-50
35-90
0th Level
1
Remove the test
Wait for 1 minute.
strip from the water
and shake it.
Water Hardness Level Indicator
On the 1
level, the 1
programme LED turns on.
st
st
On the 2
level, the 2
programme LED turns on.
nd
nd
On the 3
level, the 3
programme LED turns on.
rd
rd
On the 4
level, the 4
programme LED turns on.
th
th
On the 5
level, the 1
, 2
, 3
th
st
nd
turn on.
1st Level
2nd Level
3rd Level
1
2
The test strip shows
you the hardness
level.
and 4
programme LEDs
rd
th
4th Level 5th Level
3
4
5
13 / 43 EN
Advertisement
Table of Contents
